Fire Safe
The red Fire Safe plugs from PSI Sealing are comparable in operation to the standard EPDM plugs, but are made from a special, fire-retardant rubber. Fire retardant rubber. This makes the Fire Safe plug from PSI Sealing not only watertight and gas-tight, but also fire-retardant. The fire-retardant effect of the Fire Safe plug has been extensively tested and is certified by Lloyd's Register.
Sealing Plug PVC 103,6/0, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6W
Sealing Plug PVC 103,6/25-26, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/30-31, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/32-33, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/33-34, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/34-35, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/37-38, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/40-42, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/42-44, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/44-46, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/48-50, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WSealing Plug PVC 103,6/50-52, Fire safe pressure tight
Stock: 0Indicative delivery time: 4-6WFire delay of 60 minutes and A60
The Fire Safe plug has been tested for a fire delay of 60 minutes. In addition, a specific A60 fire resistance test was also conducted. The A-60 requirement, which occurs inter alia on board ships and offshore platforms, means that the temperature on the non-fire side of the wall in question must not have increased by more than 180 ° C after 60 minutes. This requirement is intended to prevent certain materials on the non-fire side from igniting due to the increased temperature.
Application of Fire Safe plug in A-60 wall
The Fire Safe plug from PSI Sealing, also shortened to FS, is suitable as a fire retardant lead-through plug for steel pipes through A-0, A-15, A-30 and A-60 steel walls and floors. For this purpose, the respective wall must be provided on both sides with A-60 classified insulation material, which at least covers the space 200 mm around the bushing. In addition, a pipe length of 300m must be symmetrically welded into the wall, where the pipe to be fed first and then, at both ends, a Fire Safe plug is placed. The pipe diameter of the pipe to be routed may be a maximum of 168 mm.
