Built-in Cable transits
All MCT Brattberg recessed penetrations are watertight and fire retardant. This includes the RGP, MSR and Deck & Bulkhead glands.
RGP built-in frames
MCT Brattberg has a range of round transits available under the name RGP. The RGP penetrations were originally developed for the penetration of pipes in ship walls and in offshore applications. The RGP transits are also widely used as conduit for cables and pipes in existing concrete walls, since the RGP can be mounted without further tools in a hole drilled to the correct size. The RGP is a pressure-tight penetration, which is also certified as a fire-retardant penetration
The RGP frames can be mounted in a steel sleeve with flange (SFRB) flange (surface-mounted), but also directly in the concrete.
RGPO
The RGPO was previously the open version of the RGP. This is intended for situations where the cables have already been pulled, through the opening you can easily clamp the frame around the cables. Since early 2022, the RGPO has expired and the RGP has a lengthwise opening by default, like the RGPO.
Download installation brochure
MSR Glands
The MCT Brattberg MSR Cable gland is a pressure-resistant cable gland, tested to 15 bar, developed for the rapid passage of cables or pipes in an existing steel wall. In addition to pressure-resistant, the MSR cable gland is also A60 fire-retardant. To apply the MSR cable gland, only a custom hole needs to be drilled in the steel wall or floor. Welding is not necessary, which saves a lot of time. The MSR Gland is
available is galvanized steel or in stainless steel 316L.
The MSR Swivel, is available in ten standard variants. Deviating sizes are available in consultation. The MSR Gland range is suitable for cables from 4 to 32 mm. In addition to single-cable glands, multi-cable glands (up to 8) are also available.
- Steel gland for sealing cables existing steel walls
- Welding not necessary, only drilling a suitable hole is sufficient
- A60 certified by Lloyds Register in accordance with IMO 754 (18)
- Tested up to a water pressure of 15 bar
- Resistant to water, dust, icing, vermin, etc.
- Metal parts of the MSR are made of galvanized steel, also available in stainless steel on request
Built-in frames in practice
RGP in outer wall
CCM150, casting module for the RGP150 transit
RGP
Deck & Bulkhead Glands
The MCT Brattberg MSR Cable gland is a pressure-resistant cable gland, tested to 15 bar, developed for the rapid passage of cables or pipes in an existing steel wall. In addition to pressure-resistant, the MSR cable gland is also A60 fire-retardant. To apply the MSR cable gland, only a custom hole needs to be drilled in the steel wall or floor. Welding is not necessary, which saves a lot of time. The MSR Gland is
available is galvanized steel or in stainless steel 316L.
The MSR Swivel, is available in ten standard variants. Deviating sizes are available in consultation. The MSR Gland range is suitable for cables from 4 to 32 mm. In addition to single-cable glands, multi-cable glands (up to 8) are also available.
- Steel gland for sealing cables existing steel walls
- Welding not necessary, only drilling a suitable hole is sufficient
- A60 certified by Lloyds Register in accordance with IMO 754 (18)
- Tested up to a water pressure of 15 bar
- Resistant to water, dust, icing, vermin, etc.
- Metal parts of the filler element MSR Gland are made of stainless steel
- The MSR sleeve is made of galvanized steel or stainless steel 316L
Download brochure
![RGP125F Round frame, galvanised 1 x [internal size 80x80mm]](/media/products/mct-frames-rgp-RGPO125F_1.jpg?v=1667401528)
![RGP70S Round frame, stainless 1 x [internal size 40x40mm]](/media/products/mct-frames-rgp-RGPO70S_1.jpg?v=1667401529)
Other types
More info?
Do you have questions about the cable transits or your specific situation, our MCT Brattberg specialist Maurice Welbie will be happy to help you.
